Category Archives: Cars

1964 Ford Econoline

Here is my latest acquisition, I sold the Cortina and bought this 64 Econoline, its the second I’ve owned and was originally a 240ci straight six with a 9″ rear but when I bought it it was half converted (bodged) to a 302 V8 with C4 automatic from a Mach 1 Mustang.

I have been working to finish it, make safe and do a good job of. It’s taken a hell of allot longer than I expected for a “running road legal vehicle” but there was so much that needed doing/redoing to make it safe, I’ve pretty much finished the engine mechanical side but it still needs allot of work and at some point an interior and paint.

Here are a few pictures, it’s pretty bare atm with little to no interior but it goes like a rocket and is noisy as all hell.

img_20160630_170648

img_20160630_170709

img_20160504_161040

img_20160504_170208

 

Inertia seatbelts in a Mk3 Cortina

So you want to fit front and rear inertia seatbelts in your Mk3 ford Cortina? Well it’s relatively easy and here is how I did it!

image

The fronts are a simple straight swap but its worth mentioning that they should have a long solid buckle link as otherwise they don’t do up if you are a little on the large side and the inertia reel needs to function vertically, I just bought generic three point inertia seatbelts online.

image

The rears need to be a three point type but without the extra top guide so that the inertia reel sits on the parcel shelf and functions horizontally, they also need short webbing buckles.

Originally I bought some securon rear seatbelts which were apparently Cortina fit however the webbing on the buckles was too long so they fouled on our child seat. I ended up buying generic intertia seatbelts online and removing the top guides.

Seatbelt mounting holes are already there under the rear seats, the reel itself sits on the parcel shelf and bolts through the holes already in place. I also added some extra very thick large seatbelt mount washers for added security!

image

image

1972 Mk3 Ford Cortina

image

Well here it is, the new responsible family car my four door mk3 cortina in evergreen.

Originally a 1600L but now running a 2ltr ohc pinto engine from an 80s Sierra.

It is lowered on its original steel wheels and has had an Alfa Romeo leather interior fitted (it came with the original interior and springs if I want to put it back to stock at some point) and I have fitted front and rear inertia seatbelts

It’s a one year only car with the washer pump and intermittent wiper switch mounted on the floor.

image

image

image

1967 Electric sunroof Type 34 Razoredge Karmann Ghia

1967 Electric sunroof Type 34 Razoredge Karmann Ghia,

I recently decided it was as time to part with the razor, its leaving me this weekend and below is a little information about the car from the advert I made.

This car is a 1967 model Electric Sunroof Ghia which was built in 1966 and originally purchased in Belgium as a LHD car but was converted sometime in the 70’s to RHD. I bought it in 2010 and unfortunately it fairly rapidly fell to pieces having been bodged beyond belief by previous owners, between 2011 and 2012 it underwent serious body off repairs and some restoration work at PanelKraft

The Chassis was fitted with a pair of brand new KlassicFab type 3 floorpans and any rust was taken care of, it was then sandblasted back to bare metal before being powdercoated. It was fitted with new brake lines and a new master cylinder plus new pads, shoes etc. The rear shocks were replaced and a replacement IRS sub-frame was sourced and fitted as the original one had been interestingly modified. It still has the original front beam which is tatty but solid.

Its Running on American Eagle 2ltr Porche Replica Alloys with modern Continental Tyres all round with lower profile Tyres on the front. I do also have a set of steel wheels that came with it which can be included.

The Body has no rust in it at all but is does have a fair amount of filler. Having been in Britain for many years the panels have had some patches welded in over the years and filler to smooth it out, To be honest it has had some fairly terrible welding done in the past which was uncovered when the interior was sandblasted I have had this bad welding rectified along with any rust before it was painted. The factory fitted sunroof works fine although its missing the dust seal and vanity panel, Its finished in a custom 2 pack Blue paint with matting agent giving it the satin finish which just looks lovely.

The bumpers are in excellent condition with only two very small dents, these are originals and took me a long time to source.

The front seats are Porsche tombstones which are incredibly comfortable and I believe are from a 924, these have been re-trimmed in black vinyl with blue piping the original rear bench seat has been trimmed to match, The carpet set is from spirit of the 50s.

It has an Empi Shifter, a Mooneyes steering wheel and Chrome Dash Knobs but besides these the rest is all standard and I believe there is nothing missing although the radio doesn’t seem to work and the glovebox liner is missing.

The car has been completely rewired with modern fuses, relays etc.

The Engine is an AN code 1800cc flat four motor from a Porsche 914 which is reported as being around 90bhp, it has a pair of rebuilt Solex 36-40 PDSIT carbs and runs like a dream. It has type 4 heat exchangers fitted and takes very little time to warm up although to turn the heating on or off does require the pipes to be added or removed so must be done while stationary.

The car pulls amazingly and it a lot of fun to drive, it corners beautifully and brakes well, it is a very comfortable drive and I absolutely love it.

The only negatives to my knowledge are that the bodywork is not perfect, it looks great but it does have patches welded in rather than replacement panels and a fair amount of filler under the paint. I don’t think this needs rectifying straight away but it will need sorting eventually I like to be entirely honest when selling a vehicle and if I didn’t mention it i’d feel terrible. It also has a few scratches and dinks in the paintwork (Carpark damage) but you don’t really notice them unless you look up close.
It is not stock, It does not have all the correct trim parts and it is nowhere near concourse but it isn’t that kind of car.

Click on pictures below for larger versions

wpid-rear-drivers.jpg.jpeg wpid-front-pass.jpg.jpeg wpid-front.jpg wpid-rear.jpg wpid-rear-driver-top.jpg.jpeg wpid-interior-2.jpg.jpeg wpid-interior.jpg wpid-badge.jpg wpid-bonnet.jpg wpid-boot.jpg

Vw Type 34 razoredge Ghia sunroof motor shaft

Disaster! The flexible shaft coupler which joins the sunroof motor and gearbox has snapped, this 48 year old piece of rubber had perished and finally gave way whilst I was putting the sunroof back together.

Thanks to the sterling work of Lee Hedges at T34 World I learnt that there were three sizes of flexible shaft on a T34 Ghia and that mine is the 100mm version, while searching online for any equivalent part (unsurprisingly the T34 part is no longer available) I found a Porsche part for an early 911 which looks identical and reports to be 97mm so I can safely assume that this will fit fine however only being available in the us and having a hefty shipping cost I’ve decided to give fixing mine a go first!

I found some braided PVC hose which was the same diameter as the original rubber hose which when push fitted into the metal ends seemed very solid so having cleaned all the residue from the ends I cut the hose down to the correct length and glued it into them using some epoxy resin.

image

image

This seemed to do the job fine and after being left to dry I fitted it up to the car, adjusted the sunroof clutch and tested it.

What with the reconditioned gearbox and new cables my sunroof now shuts smoothly and fully for the first time since I’ve owned the car!

image

Since doing this I have actually found that Porsche part number 90156461506 sunroof shaft is a perfect fit and only cost around £15